The ease and convenience of kegging
homebrewed beer and using CO2 to serve your homebrew cannot be matched.
Homebrewers have been using Cornelius kegs for years. The use of
carbon dioxide gas to force carbonate the beer or even homemade soda pop
takes weeks off of the brewing process. For more information
see HOW
TO KEG HOMEBREW and CARE
& CLEANING OF KEGS.
KEG
WASHER $19.95
Connects to your utility sink and both soda keg
posts. Flushes keg, connectors, tubes and posts with hot water.
Allows cleansers and sanitizers to access all interior parts. Use
your ¼" MFL keg fitting connectors. Industrial grade construction.
ORDER
KEG CONNECTORS
SEPARATELY
Keg Systems for Homebrewers
BALL
LOCK HOMEBREW KEG SYSTEM $189.95
The keg system is the fastest way to package
your homebrew and forced carbonation makes soda
making a snap too. You get a 5 gallon used soda keg of
your choice, a used 5 pound C02 tank which is inspected and ready to fill,
single gauge regulator, connectors with male thread for easy cleaning,
hoses with female thread adapters, plastic squeeze faucet. Ready
to use!
USED
BALL LOCK KEG includes new o-rings $34.95
Keg
System Components
M.
CO2 REGULATOR $54.95
single gauage with ¼" MFL
L.
¼" FFL to ¼" BARB $1.45
connects ¼ ID hose to ¼" MFL
J.
¼" FLARE WASHER $0.20
use on metal to metal flar connections
K.
½" STAINLESS CLAMP $0.70
stainless steel, range of 1/8" to ½"
E.
PLASTIC FAUCET $3.95
picnic tap fits ¼: ID hose
¼"
ID x ½" OD HOSE $0.80/ft.
5
POUND CO2 TANK $94.95
used as is, inspected, shipped empty
CO2
TANK WASHER $0.25
must go between tank and regulator
Ball Lock Keg Parts
A.
GAS CONNECT $5.95
¼" male thread flar fitting
B.
LIQUID CONNECT $5.95
¼" male thread flar fitting
I.
POST O-RING $0.65
small gasket for around disconect post
F.
CLOSURE O-RING $1.75
large gasket for under the keg cap
H.
DIP TUBE O-RING $0.55 fits around gas
and liquid dip tubes
BAR
ROOM BEER FAUCET SET $47.95
Complete beer tap faucet assembly ready to mount
in your refrigerator door or behind your basement bar. All chrome faucet,
3" shank and hardware with a smart looking black tap handle. Beer faucets
are switches, not valves. You must pull the switch full on to pour the
perfect beer. Opening the switch part way will result in foam.
TWO
KEG CO2 GAS LINE SPLITTER $19.95
All brass splitter allows you to operate two
kegs from one regulator without any chance of the beers mixing. Includes
1 gas inlet fitting and 2 in-line back check valves all with ¼"
MFL fittings. Set up provides easy change over and cleaning. Includes three
¼" FFL to ¼" hose barb fitting.
Pin Lock Keg Parts
C.
GAS CONNECT $6.95
¼" male thread flar fitting
D.
LIQUID CONNECT $6.95
¼" male thread flar fitting
I.
POST O-RING $0.65
small gasket for around disconect post
F.
CLOSURE O-RING $1.75
large gasket for under the keg cap
H.
DIP TUBE O-RING $0.55 fits around gas
and liquid dip tubes
BEER
FRIG THERMOSTAT $69.95
Easy to install to household refrigerators or
frost free freezers. This unit plugs into the wall outlet and the refrigerator
plugs into the unit. The control probe is slipped inside the refrigerator
on the hinged side of the door so there is no need to poke holes in the
frig. Allows you to have complete control over a temperature range
of 30 to 80 degrees F. UL Approved, commercial grade.
THE
CARBONATOR $16.95
Carbonates
still beverages and preserves carbonated beverages with CO2 in plastic
soda bottles. REQUIRES
OUR KEGGING SYSTEM ABOVE.
BALL
LOCK HOMEBREW KEG SYSTEM $189.95
BAR
ROOM BEER FAUCET SET $47.95
TWO
KEG CO2 GAS LINE SPLITTER $19.95
BEER
FRIG THERMOSTAT $69.95
THE
CARBONATOR $16.95
Carbonates
still beverages and preserves carbonated beverages with CO2 in plastic
soda bottles.