> Beer > Kegs > Keg Parts and Fittings
Homebrew Keg Parts and Fittings
Update and repare your used soda kegs with new replacement parts.
Hose Barbs, Connectors and Clamps
Investing a little money in connectors and fittings which provide versatility is always wise. A system based on modular design will give you flexibility and functionality. This translates into move enjoying and less fooling-around-with when it is time to work or play.
Replacement liquid dip tube for both ball lock kegs. To replace first remove the tank plug from the liquid (out) side of the keg. You will need a 7/8 or 11/16 wrench to remove the tank plug. Remove dip tube and oring, place new oring on the new dip tube and slide into the opening. Clean the tank plug and poppet valve and replace back on the keg. |
|
|
1/4 male thread flare fittingGas inlet quick connect for ball lock kegs. The threaded hose connection allows for complete modular setup and easy cleaning. You may require item 019564 Swivel Nut 1/4 FFL to 1/4 Hose Barb. |
|
|
|
1/4 male thread flare fittingLiquid outlet quick connect for ball lock kegs. The threaded hose connection allows for complete modular setup and easy cleaning. You may require item 019564 Swivel Nut 1/4 FFL to 1/4 Hose Barb. |
|
|
Replacement o-rings for ball lock keg posts. |
|
|
1/4 male thread flare fittingGas inlet quick connect for pin lock kegs. The threaded hose connection allows for complete modular setup and easy cleaning. You may require item 019564 Swivel Nut 1/4 FFL to 1/4 Hose Barb. |
Long TubeReplacement liquid dip tube for pin lock kegs. Remove liquid (out) side tank plug and poppet assembly with 7/8 socket. Remove dip tube and oring. Replace new dip tube with a new oring before placing it in the opening. Clean your tank plug and poppet valve assembly before placing it back on the keg. |
|
|
|
1/4 male thread flare fittingLiquid outlet quick connect for pin lock kegs. The threaded hose connection allows for complete modular setup and easy cleaning. You may require item 019564 1/4 FFL Nut to 1/4 Hose Barb. |
|
|
Replacement o-rings for pin lock keg posts. |
30 inch long with 1/4 FML and squeeze faucetRequires 1/4 inch male liquid keg connector.Pre assembled and ready to use beer dispensing hose for portable and fixed draft beer setups. |
|
|
The beer faucet adapter attaches to the liquid side quick disconnect and accepts our standard bar room beer faucet. This is the perfect way to serve your homemade draft beer at picnics, tailgate parties or on the deck. Requires MFL liquid disconnect. |
|
|
Complete beer tap faucet assembly ready to mount in your refrigerator door or behind your basement bar. All chrome faucet, 3 inch shank and hardware with a smart looking black tap handle. Beer faucets are switches, not valves. You must pull the switch full on to pour the perfect beer. Opening the switch part way will result in foam. |
|
|
The picnic squeeze tap connects to 3/16 and 1/4 inch ID beer dispensing line and can be disassembled for easy cleaning. |
|
|
Large replacement o-rings for soda keg caps. |
|
|
|
Replacement o-rings for liquid and gas dip tubes. |
Straight Short TubeReplacement gas dip tubes for both ball and pin lock kegs. To replace first remove the tank plug from the gas (in) side of the keg. You will need a 7/8 or 11/16 wrench to remove the tank plug. Remove dip tube and oring, place new oring on the new dip tube and slide into the opening. Clean the tank plug and poppet valve and replace back on the keg. |
Order in feet.
|
|
|
|
Requires 1/4 MFL liquid disconnectThe beer faucet adapter attaches to the liquid side quick disconnect and accepts our standard bar room beer faucet. The perfect way to serve your homemade draft at picnics, tailgate parties or on the deck. |
|
|
Hose barb attaches to 1/4 or 3/16 inch ID hose and the threaded side fits 1/4 inch male flare fitting. |